Ultralight XR Insulated Air Sleeping Mat

ThermalCore insulation uses a single or multiple layers of TRM material to reflect warmth back to the sleeper. The TRM layers reduce internal air movement, and the smaller die cuts, compared to prior models, reduce this further still. The result is a significant increase in both R-Value and in real-world insulation performance, while reducing weight and packed volume.

To ensure that you will be warm when you sleep (especially when the ground is colder), it is essential to know how well your sleeping mat resists heat loss into the ground. This resistance is known as an R-Value. A laboratory-tested R-Value is the only way to measure resistance to heat loss

Sea to Summit has always provided independent lab-tested R-Values for its sleeping mats. Since January 2020 we have used the industry standard ASTM F3340 test to provide R-Values for our mats.

There are several other factors which will determine how well a sleeping mat will insulate, but the standardized ASTM R-Value test means you can compare resistance to heat loss in sleeping mats across different brands

Sea to Summit developed the XPRESS valve to make inflation, deflation and adjustment of its air mats quicker and simpler than conventional air mats. The valve integrates a one-way inflate port, a rapid dump deflate port and a fine-tune button into a single, low-profile unit. The XPRESS valve fits the nozzle of the Airstream pump integrated into the stuff sack supplied with your Sea to Summit Air Sprung Cell sleeping mat.

(Pro Tip - turn the inflator bag of the sleeping mat pump inside out to reveal a nozzle sized perfectly for the mini-XPRESS valve of an Aeros Pillow.)

The name sounds complicated, but the process is really simple. Instead of rolling a film onto a fabric to make it airproof, liquid urethane is forced through a controlled gap in a lamination head where it works its way into the crevices between the yarns. This results in a permanent bond - with an incredible level of reliability. Sea to Summit was the first company to pioneer this technology in sleeping mats - and continues to insist on a laminating thickness that results in stable, long-lasting welds.

The Airstream™ Pumpsack is Sea to Summit's big volume mattress pump which we've now integrated into the stuff sack of every Air Sprung Cell™ mat.

The clever design opens at one end to stow the air mat and the other end unfolds to become the built-in pump. The Airstream™ Pumpsack can be inflated with a single breath and takes just two or three cycles to fill our mats. Not only is it faster than inflation by mouth, but there is minimal breath condensation entering the mat and it eliminates dizziness from blowing the mat up directly by mouth.

The Airstream™ Pumpsack is also compatible with Sea to Summit's smaller multifunction valve, which is now featured on the updated Aeros pillow range, along with the Air Seats.

The Pillow Lock™ System comprises of self-adhesive hook-and-loop patches which are supplied with all Sea to Summit sleeping mats (as of Spring 2019).

Attached to your sleeping mat, these patches secure your pillow and prevent it slipping – yet they will not snag on clothing or other lightweight fabrics.

All Sea to Summit Pillows (as of Spring 2019) are compatible with this system. Existing pillows can be made Pillow Lock™ compatible by adding an Aeros Pillow Case.